Anybody experiencing this 'featurette'.
Uncheck the 'Scan on boot up if computer....' option under the Scan Schedule tabs in Settings, and then check on it after a reboot or the following morning (when you would usually have rebooted if you switch your PC off overnight).
Does anybody find that the option has somehow gotten itself rechecked, ie, it is ON again?
Have just noticed this (but to be fair have had some issues with this option before & uninstalled completely and reinstalled to try to resolve it.)
Be interested to see if this is happening to anyone. Am running latest build .193.
Regards
Balders
Scan on boot up if computer...has mind of its own
Page 1 / 2
Userlevel 3
Hi Baldrick,
I haven't yet heard of this happening to others and I'm not able to reproduce the issue on my machine. Is this happening even after clicking "Save All" on the settings screen? Also does this only seem to occur when a new version is installed?
Thanks!
George
I haven't yet heard of this happening to others and I'm not able to reproduce the issue on my machine. Is this happening even after clicking "Save All" on the settings screen? Also does this only seem to occur when a new version is installed?
Thanks!
George
Hi George
Thanks for the response. It is happening even after clicking "Save All" on the settings screen...and I have done this each day for a week.
I have .193 installed and will certainly check as and when a new version comes out to see if there is any change but I have had .193 for a while and so am not sure what you mean by 'new version'?
Balders
Thanks for the response. It is happening even after clicking "Save All" on the settings screen...and I have done this each day for a week.
I have .193 installed and will certainly check as and when a new version comes out to see if there is any change but I have had .193 for a while and so am not sure what you mean by 'new version'?
Balders
Userlevel 3
Hey Balders!
Thanks for the info! Please open up a support ticket so that we can gather logs and look further into this. Makes me wonder how many other people might have this same issue but just haven't noticed yet. And please keep us posted.
Thanks again!!
George
Thanks for the info! Please open up a support ticket so that we can gather logs and look further into this. Makes me wonder how many other people might have this same issue but just haven't noticed yet. And please keep us posted.
Thanks again!!
George
Userlevel 3
Hi Baldrick!
I just wanted to follow up and see how everything is going. Are you still experiencing that issue? I looked at your support ticket and noticed that you are in the process of arranging a call back time with our Support Team. We are located in the Mountain Time Zone, so 1pm our time will be 7pm your time (British Summer Time or GMT +1). Please let us know what we can do to help get that call back set up at a convenient time for you.
Thanks!
I just wanted to follow up and see how everything is going. Are you still experiencing that issue? I looked at your support ticket and noticed that you are in the process of arranging a call back time with our Support Team. We are located in the Mountain Time Zone, so 1pm our time will be 7pm your time (British Summer Time or GMT +1). Please let us know what we can do to help get that call back set up at a convenient time for you.
Thanks!
Hi George
Have been postingre. this issue over at Wilders and someone who shall remain nameless came up with an idea of "...possibly the system not shutting down correctly and it losing the configuration change".
So this is what I posted over there and the results of the initial tests (based on that theory):
Unchecked "Scan on boot up if...." & 'Save All', then closed the WSA GUI only and restarted.
RESULT: Checking after restart shows the "Scan on boot up if...." CHECKED.
Unchecked "Scan on boot up if...." & 'Save All', then closed the WSA down completely using the "Shut down Webroot Protection" option by right clicking the sys tray icon and restarted.
RESULT: Checking after restart shows the "Scan on boot up if...." NOT CHECKED.
Checked the "Scan on boot up if...." AND the "Perform a scheduled Quick Scan..." options & 'Save All', then closed the WSA GUI only and restarted.
RESULT: Checking after restart shows the "Scan on boot up if...." NOT CHECKED BUT the "Perform a scheduled Quick Scan..." WAS STILL CHECKED.
Unchecked "Scan on boot up if...." option, left the the "Perform a scheduled Quick Scan..." option unchecked & 'Save All', then closed the WSA down completely using the "Shut down Webroot Protection" option by right clicking the sys tray icon and restarted.
RESULT: Checking after restart shows the "Scan on boot up if...." AND the "Perform a scheduled Quick Scan..." options were NOT CHECKED.
So, unless I am mistaken or got confused that the "Scan on boot up if...." is affected by system not shutting down correctly and it losing the configuration change BUT this does not affect the "Perform a scheduled Quick Scan..." option.
Not what I had expected but perhaps someone from Support can make some sense of it?
Regards
Balders
Have been postingre. this issue over at Wilders and someone who shall remain nameless came up with an idea of "...possibly the system not shutting down correctly and it losing the configuration change".
So this is what I posted over there and the results of the initial tests (based on that theory):
Unchecked "Scan on boot up if...." & 'Save All', then closed the WSA GUI only and restarted.
RESULT: Checking after restart shows the "Scan on boot up if...." CHECKED.
Unchecked "Scan on boot up if...." & 'Save All', then closed the WSA down completely using the "Shut down Webroot Protection" option by right clicking the sys tray icon and restarted.
RESULT: Checking after restart shows the "Scan on boot up if...." NOT CHECKED.
Checked the "Scan on boot up if...." AND the "Perform a scheduled Quick Scan..." options & 'Save All', then closed the WSA GUI only and restarted.
RESULT: Checking after restart shows the "Scan on boot up if...." NOT CHECKED BUT the "Perform a scheduled Quick Scan..." WAS STILL CHECKED.
Unchecked "Scan on boot up if...." option, left the the "Perform a scheduled Quick Scan..." option unchecked & 'Save All', then closed the WSA down completely using the "Shut down Webroot Protection" option by right clicking the sys tray icon and restarted.
RESULT: Checking after restart shows the "Scan on boot up if...." AND the "Perform a scheduled Quick Scan..." options were NOT CHECKED.
So, unless I am mistaken or got confused that the "Scan on boot up if...." is affected by system not shutting down correctly and it losing the configuration change BUT this does not affect the "Perform a scheduled Quick Scan..." option.
Not what I had expected but perhaps someone from Support can make some sense of it?
Regards
Balders
Userlevel 3
Hi Baldrick!
I have updated your support ticket, so we can continue troubleshooting there. This way we can gather logs once again so we can get the most up to date WSA logs. You should be receiving an email from Webroot support shortly.
Thanks so much for your cooperation and patience!!
George
I have updated your support ticket, so we can continue troubleshooting there. This way we can gather logs once again so we can get the most up to date WSA logs. You should be receiving an email from Webroot support shortly.
Thanks so much for your cooperation and patience!!
George
Hi Baldrick,
I'm reviewing support tickets, and I came across this one. Did the uninstall and reinstall end up taking care of the problem, or did it ever occur again?
I'm reviewing support tickets, and I came across this one. Did the uninstall and reinstall end up taking care of the problem, or did it ever occur again?
Hi Jim
No it did not but then I was contacted by Joe S from Support who connected by LogMeIn and did some resetting. Currently, reviewing what the result of that is and will look to get back to him shortly with an update.
Regards
Baldrick
No it did not but then I was contacted by Joe S from Support who connected by LogMeIn and did some resetting. Currently, reviewing what the result of that is and will look to get back to him shortly with an update.
Regards
Baldrick
Hi Baldrick,
It's been about three weeks since Joe S. took a look at the system and reset the settings. Have you encountered the issue again since then? I'm wondering if it's ok to mark this conversation as solved or not. I wouldn't want to do that prematurely. Thanks 🙂
It's been about three weeks since Joe S. took a look at the system and reset the settings. Have you encountered the issue again since then? I'm wondering if it's ok to mark this conversation as solved or not. I wouldn't want to do that prematurely. Thanks 🙂
Hi Jim
Have not noticed any further issues re. this problem so am happy for this to be marked as solved.
Regards
Baldrick
Have not noticed any further issues re. this problem so am happy for this to be marked as solved.
Regards
Baldrick
Sorry to hijack this thread ...
While I don't have a problem with keeping settings I wonder why boot up scans are running from time to time even if this option is disabled. I always disable this option after installation of WSA but sometimes, it seems randomly, the boot up scan runs anyway. I thought that a sense of disabling this option is to avoid boot up scans completely.
While I don't have a problem with keeping settings I wonder why boot up scans are running from time to time even if this option is disabled. I always disable this option after installation of WSA but sometimes, it seems randomly, the boot up scan runs anyway. I thought that a sense of disabling this option is to avoid boot up scans completely.
It is best to Open a Support Ticket so that we can collect logs. There are many factors that come into play - do you have any major programs that start when you turn on your computer?
Also, do you have scheduled scans enabled?
Also, do you have scheduled scans enabled?
Thanks for the reply but no need to open a support ticket. No anomalies observed on my system. I just wanted to point out that even if the option is disabled scans run randomly during boot up (providing that the scheduled scans are set).
As for your questions, 17 items initiate on boot up, nothing special (wireless, VAIO things, ATI things, audio and video services and a few others). Yes, I do have scheduled a routine scan daily at 12:00 p.m.
If the scheduled scan is missed (PC is turned off) let's say twice or three times, a scan runs during the next boot up. I don't se anything bad in this behaviour as long as the option is enabled. However if the option is disabled I would expect literally no scans during boot up regardless how many scans were missed.
Nevertheless it's probably coded in WSA that if a couple of scans is missed, it triggers a scan anyway, sometimes during boot up, sometimes later after boot up.
EDIT: Just noticed that a scan has run cca 30 mins after I booted up my PC today. So my above last sentence is confirmed.
As for your questions, 17 items initiate on boot up, nothing special (wireless, VAIO things, ATI things, audio and video services and a few others). Yes, I do have scheduled a routine scan daily at 12:00 p.m.
If the scheduled scan is missed (PC is turned off) let's say twice or three times, a scan runs during the next boot up. I don't se anything bad in this behaviour as long as the option is enabled. However if the option is disabled I would expect literally no scans during boot up regardless how many scans were missed.
Nevertheless it's probably coded in WSA that if a couple of scans is missed, it triggers a scan anyway, sometimes during boot up, sometimes later after boot up.
EDIT: Just noticed that a scan has run cca 30 mins after I booted up my PC today. So my above last sentence is confirmed.
Thank you for updating the thread, there are many factors that come into play. Also, I think this scan would be pushed back if you immediately started doing work or tasts on your machine. For example, if you opened a full screen application and started working, there are settings that would delay the scan until less resources were being used.
Understood Mike.
However, please consider changing of wording "Scan on boot up if the computer is off at the scheduled time" because even if this option is unchecked (i.e. disabled), it means that users don't count with scans on boot up at all, yet there are cases where scans run on boot up anyway.
However, please consider changing of wording "Scan on boot up if the computer is off at the scheduled time" because even if this option is unchecked (i.e. disabled), it means that users don't count with scans on boot up at all, yet there are cases where scans run on boot up anyway.
There are some cases in which WSA will make a decision to scan on bootup if it detects suspicious activity. It would be tricky trying to put those conditions into words that would fix on the screen. For instance, "Don't scan on bootup if the computer if off at the prior scheduled scan time except in circumstances in which WSA has no choice but to perform the scan to best protect the computer," would probably not fit on the screen. 🙂 Do you have any suggestions as to how to word this in short enough language that it would fit? Probably this is not something that bothers most people, but if there is an easy change to be made, we could always look into it.
lol you did make me laugh Jim, indeed, you beat me, let it be how it is ;-)
maybe a note in the user guide would be enough
pegas is presently on his phone 🙂
maybe a note in the user guide would be enough
pegas is presently on his phone 🙂
"Don't scan at boot and let me take my chances."@ wrote:
There are some cases in which WSA will make a decision to scan on bootup if it detects suspicious activity. It would be tricky trying to put those conditions into words that would fix on the screen. For instance, "Don't scan on bootup if the computer if off at the prior scheduled scan time except in circumstances in which WSA has no choice but to perform the scan to best protect the computer," would probably not fit on the screen. 🙂 Do you have any suggestions as to how to word this in short enough language that it would fit? Probably this is not something that bothers most people, but if there is an easy change to be made, we could always look into it.
😃
Well I have to say guy's and no offence I don't even notice it with an i7 CPU and SSD drives. :robottongue:
TH
TH
Rub it in my friend, rub it in! :S@ wrote:
Well I have to say guy's and no offence I don't even notice it with an i7 CPU and SSD drives. :robottongue:
TH
I think that area of the user guide is referring to "scheduled scans," but the scans taking place are not of the scheduled variety. While it's clear the question could be raised at some point, I'm not sure the user guide necessarily needs to say that since the scan that is occurring most likely does not involve a scheduled scan at all.
How about we make a knowledgebase article out of the question and answer? That would provide an easily searchable answer for the question, if others happen to have it as well.
How about we make a knowledgebase article out of the question and answer? That would provide an easily searchable answer for the question, if others happen to have it as well.
Yes Jim, a KB article would be perfect. Sorry for making up you work but I wanted to help other users who might get surprised that a scan has run when the option in questions is disabled. Hope you understand.
Thanks 🙂
Thanks 🙂
Page 1 / 2
Reply
Login to the community
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.